• August 31, 2017 /  Server & Programming
    techno9

    Free TV shows are broadcast by free television networks with one primary goal: to capture the greatest number of viewers and hold their interest for the longest time.These numbers are then used by the networks to persuade advertisers to place their commercials on these top-rated shows.

    Sounds simple, but this kind of work is not the easiest job in the world.

    Programming the shows on a network has to consider so many factors.Capturing the greatest number of viewers calls for a judicious spread of programs that will interest all kinds of viewers.Factors about these viewers – age, gender, and their various cultural, religious, and political persuasions – have to be carefully considered as well.

    Very important, too, would be the decision on what time slots these shows are programmed to be aired.Ideally, these would be the time segments when the intended target markets for these free shows are thought to be concentrated.(Surveys are done to pinpoint the precise time slots for all kinds of audience groupings.)

    In short, the free TV shows that you love so much are not there on a whim or through sheer luck.They are there precisely to MAKE you watch them at such a precise time.

    The following are some programming strategies that make up the various decision points that network executives consider when they air these shows.

    Dayparting

    Dayparting is the practice of dividing the day into several parts.After which, they assign particular shows to air in these time divisions (with the help of survey results) hoping to catch and hold the interest of the audience.

    Tent pole programming

    Here, the programmers identify the network’s hit series and place two unknown or weak shows on either side of the program.Usually, the strength of the hit series (the network’s tent pole) brings the other programs to rate good as well.

    In the movies and in TV network programming, a tent pole is a film or a flagship series which is heavily promoted (and invested on) and is expected to hold up everything that the movie studio or TV network had produced.

    The term is borrowed from the old traveling circus shows where tents were constructed in each town they went to.The big circus tent was largely held up by the main tent pole in the center.

    Hammocking

    Working like a real hammock, this is the physical opposite of tent pole programming.This time, an unpopular program is aired in-between two hit shows, sort of “hammocking” the weak show using the two popular hits.

    The main goal, of course, is to gather bigger audience or viewers to the weak show, carried as it is by two popular shows.

    Counterprogramming

    This programming strategy is usually employed by rival networks out to derail the competitor’s program.It is airing a totally different program that appeals to another group of audience.The goal is to diminish or wipe out a big portion of the rival’s audience share.

  • August 31, 2017 /  Hardware & Software
    techno11

    It is quite well known that the working of the computer is pulled by hardware and software. One can define computer hardware as the electronic, magnetic, and electric devices that carry out the computing functions. Hardware is the physical components of the computer like microprocessor, hard disks, RAM, and motherboard. The peripheral devices such as monitor, mouse, keyboard, printer, and speakers can also be included in the list of hardware parts. The programs that run on the computers like Windows, C++, and Photoshop are the software parts of the computer. A good example for an easy understanding of hardware-software definition is music CDs. The actual compact disk is the hardware, while the songs and music in the CD are the software parts.

    There is another way to define computer hardware. Hardware devices are the executors of the commands provided by software applications. For example, let us see what happens when you click the print button of the web browsing software. The software application provides a command to the processor, which is the central part of all computer hardware. Processor in turn checks for an attached printer. If the printer is ready, the software will get a positive response from the processor. Then the software application provides instruction to the printer via the processor to print the web page. In that sense, hardware parts are the foot soldiers and software applications are the commanders in the digital operation that takes place within a computer.

    The main player of computer hardware is undoubtedly the microprocessor. It is the sun in the solar system of computer hardware devices. It is the central component and all other components work around it. It is an integrated chip on which a number of functions are incorporated. Two specifications determine its efficiency. One is its processing speed, which is measured in gigahertz. The other is its bit rate. Commonly available processors are 32 bit and 64 bit. The bit rate is a measure of the efficiency of a processor to carry out multiple operations at the same time.

    One cannot define computer hardware without mentioning the two types of memory used in computers. One is permanent memory. It refers to the magnetic storage capacity of hard disk. It is measured in gigabytes. The second is RAM or random access memory. This memory is able to store data only when the computer is switched on. The memory will lose all the data when the computer is switched off.

    Another important product that one should mention when one defines computer hardware is motherboard. It is the electric and electronic circuit board on which all the other components are inserted. There are several other kinds of products such as sound card, video card, network card, and modem that complete the hardware spectrum.

  • August 29, 2017 /  Hardware & Software
    techno20

    A hard drive might get damaged due to several reasons like wear and tear, logical board damage, read/write head crash, water damage etc. If you are encountering errors that system hardware has malfunctioned, the possible causes could be related to device driver issues, RAM module concerns and similar other hardware problems. However, in case of hard drive damage, you will need to replace the hard drive and restore from the most recent backup available. In case of valid data backup absence, Hard Drive Recovery service can help extracting the lost data.

    While trying to start a Windows based system, it might hang displaying the below error message on screen:

    Hardware Malfunction
    Call your hardware vendor for support
    The system has halted

    You might also encounter errors like:

    NMI: Fail-safe timer

    Or

    NMI: Eisa IOCHKERR board x

    Cause

    The prominent causes for the above errors to occur are:

    1.Hardware (like RAM, hard drive, motherboard etc.) malfunction
    2.Damaged or incompatible drivers

    Solution

    The error message doesnt suggest about the specific hardware in issue. So, you need to perform basic troubleshooting processes:

    1.Try removing RAM modules in order, leaving only the minimum amount required.
    2.The problem might be occurring due to defective adapters. You can try removing adapters that are optional to start the system. If you dont observe the above error message, the removed adapter was the issue.
    3.Install the latest drivers available
    4.Install the latest BIOS, EISA configuration and firmware configuration software version
    5.Set your system BIOS settings to Fail-safe defaults
    6.Disable antivirus software protection, if any, in BIOS and set Plug and Play OS to No
    7.Diagnose and troubleshoot issues with motherboard, video adapter, processor chips and drive subsystem controller
    8.Check the hard drive for errors. If it is faulty, replace the hard drive and restore data from backup.

    If you dont maintain a valid backup, consult Hard Drive Recovery technicians for best technical guidance and data recovery. Data Recovery Service is the complete assistance that recovery experts provide to extract valuable information from damaged hard drives.

  • August 29, 2017 /  Hardware & Software
    techno12

    The publicity is massive for dynamic advertising, now manufactures are coming up with progressive dynamic marketing solutions with their eye on the entry level digital poster solutions.

    This is a twist on a lcd advertising screen, as this unit features 4 displays all 17″ and in the landscape orientation on a unique bracket, these just like the digital poster are fed with media from storage cards.

    The foremost distinction is that this solution can have 2 different ads consecutively at the same time increasing your ad earnings if you are a dynamic signage advertising firm. These are to be utilized indoors and the foot has the provision to be bolted to the ground to prevent unauthorised removal.

    One challenge of digital posters is how to refresh media as each lcd advertising screen is standalone, now media can be distributed over the net to a hard disc drive and then fed to each screen, creating a secluded access solution.
    With companies looking to build up their market segment and looking into revolutionary ideas to attract more clients to their store lcd advertising displays are increasing in reputation, but with this hardware it opens up a new level of promotion, as it could be set up initially to be updated manually then if the shop owner decides to run it throughout their chain they can then pay for the HDD unit to run them from one chief setting, slashing commuting time and outlay in delivering fresh content.
    The totem can also be tailored to be installed on buses and even on ferries, so commuters can be entertained whilst they are in transit, dropping their perceived wait time, also identified as time warping.

    Or if providers want to have a modern look they can use a cable, the 4 merchandising tvs are on the brink from the cables.

    This gives you a rather stream lined and proficient solution and perfect for in windowpane dynamic promotion.

  • August 29, 2017 /  Computer & Multimedia
    techno5

    Getting cash for computer scrap is one of the easiest ways to make money. Whats the use of leaving your old desktop in the corner to collect dust, when you can scrap it and make some extra cash? Since the inception of computer scrap recycling programs, and programs that offer cash for other types of electronic scrap, thousands of eco-enthusiasts have been praising the cash for electronic scrap industry and recommending the services to friends.

    But what many do not know is that by paying attention to the following steps, hints, and tricks, you can prepare your computer to get scrapped in a way that will guarantee more cash in your pocket. When scrapping computers, volume is a crucial and deciding factor. Before attempting to sell your computer scrap on E-bay and other vendor sites, having at least 5-10 pounds of computer scrap would be in your best interest. That way, these vendors will be more interested in your items and pay you a greater amount.

    Before scrapping a computer, be sure to evaluate the technology and make sure its actually worthless. Usually, working parts within a computer will be worth more than what youll get when selling your computer scrap to a vendor. Everything inside a computer is worth a different amount, because they are each composed of different precious metals. The main components of a computer are the case, disk drives, hard drives, motherboards, CPUs, RAM, PCIs, and power supply. When scrapping a computer, it is important that you can recognize and remove these components without causing damage to the system.

    Remember, quantity is what matters, so amass as many parts of different desktops and laptops as you can before separating the computer scrap into the following categories: 1) Gold Fingers, 2) PCI boards and motherboards, 3) CPUs, and 4) RAM. Each of these categories pays a bit differently, which is why it is important to understand the classification process and criteria qualifications of these categories. By visiting e-scrap websites, doing research, and educating yourself about the technology found within your computers, you will be well on your way to making lots of cash for your electronic scrap.

    While hard drives, computer cases, and disk drives can easily be sold to scrap yards, the other components of a computer should strictly be sold online. Online vendors will usually pay more, but with this convenience and larger payout comes a larger risk. So do your research, read reviews, and protect yourself from greedy online vendors whose main priority is ripping you off.

  • August 27, 2017 /  Robotics
    techno16

    Forex trading robots are all over the internet, costing around $200.00 or less they promise a huge income monthly with no effort for the cost of a night out at the bar. So if you can make money so easily why is everyone not trading and giving up their jobs? The answer of course is they don’t work and the reason why is enclosed.

    Forex robots promise huge gains, with little or no draw down which if these track records were true would mean they were producing better gains that super traders like George Soros, Larry Hite or Jimmy Rodgers and these are billionaire traders – doesn’t quite add up does it? Of course it doesn’t and a quick look at the track records will explain why.

    You get big claims but where is the independent verification of results? You don’t, of course get any verification because these robots have simply not made the gains they claim.

    Most robots base their track records on simulations going backwards over closing price data and this of course is easy because – you know all the highs and lows in advance! In the real world of trading you don’t know this key data and that makes trading a lot harder.

    Some Forex robot vendors produce gains they say are real but there is no outside verification from a neutral party and you are taking the word of the person selling the system.

    In reality the reason you can buy these robots so cheaply is – they don’t make money and the only person generating the regular income is the vendor of the system.

    If you want to make money in Forex trading forget these cheap, get rich quick systems and do what all successful traders do and that’s learn skills. In life to make money you have to learn the basics and put in some effort but the good news about currency trading is for the effort you make, no other industry can reward you so well as global currency trading.

    NEW! 2 X FREE ESSENTIAL TRADER PDFS
    ESSENTIAL FOREX TRADING COURSE

    For free 2 x trading Pdf’s, with 50 of pages of essential Forex info and the BEST Currency Trading Strategies for success, visit our website at: .

  • August 26, 2017 /  Robotics
    techno13

    I,Robot takes place in the future, where most people own a personal robot to help out with daily life. The movie, starring Will Smith, is based on Isaac Asimov’s similarly titled book.

    In this futuristic world, all robots are hardwired with three laws designed to keep people as well as robots safe:

    1. A robot may not injure a human being or, through inaction, allow a human being to come to harm.

    2. A robot must obey orders given to it by human beings, except where such orders would conflict with the First Law.

    3. A robot must protect its own existence as long as such protection does not conflict with the First or Second Law.

    During one of the discussions Will Smith (Detective Spooner) has with Dr. Landing’s posthumous recordings, the doctor explains that the end of these laws, even though they are perfect, is Revolution. Why? Why can’t we guarantee our safety? Will we ever phase out the risks of daily life?

    The answer is: Life will always be risky. For this reason postmodernism, which says “live and let live,” is useless. Just “living” and “being safe” are insufficient purposes for living. God designed us for more than just surviving. In any case, safety is an illusion. The only way to endure the daily struggles of living is through courage and tenacious faith.

    Logic is harmless, but daily life is inherently illogical. The only thing that balances out illogical evil is illogical good. Sunny, the only robot designed with a heart described the greater masses of his peers as “slaves of logic.” Sunny could lead his peers because he was designed to be something besides a slave.

    Such is the handicapping effect of postmodernism that the phrase, “This is for your own protection,” can be used to justify anything. Viki justified her oppression of mankind with the supposition that she would guarantee the survival of mankind. But people were created for more than just survival. This is why the prospect of being locked in our homes for the rest of our lives “for our own safety” is repugnant to us.

  • August 26, 2017 /  Computer & Multimedia
    techno12

    Computer security hazards are a constant and never ending concern for information security managers, especially due to the increasingly deceptive modes of theft and hacking that are being created and developed. When it comes to security for computers, their programs and the information that you are protecting, there is never a moment where you want to find your organization or the management systems it uses are vulnerable or at risk. For this reason, it is crucial that you are always up to date on industry practices and norms, so that you can implement these new and revised techniques with each computer security hazard as they arise and to prevent future instances.

    Any training you take to learn to manage computer security hazards and threats for a company and organization should provide you with a comprehensive education on the different types of threats possible, as well as how they function, how to prevent and detect them and how to fix the damage they can cause. You will also need to be informed off the way in which networks operate in order to create the most secure for your company, or if one is already in use, to know how it operates and how to reduce the security hazards that you might face.

    Perhaps the most important and useful training you can receive is how to relay risk reduction and management skills to other individuals within the company. The biggest hazard to an organization’s network is the individuals that will be using it daily, and all of these people will need to be made aware of measures that need to be taken and educated in your network’s ability to deal with specific threats. This form of education and management is a vital role in reducing the hazards that can potentially plague the computer security of your firm, which is why it requires full time management. If you are able to combine your technical skills with great people and communication skills, this might be the best role for yourself in the field and present more opportunities for you career wise.

    If you are considering a career in computer security management, training on the hazards to these networks is an important and integral part of that education. Because it is a field that is high in demand, the career possibilities and opportunities are great. Invest the time and energy in educating yourself about all aspects of this path in order to give yourself the best advantage when it comes time to look for employment. Employers are always looking for individuals with a wide breadth of understanding and knowledge surrounding the networks that they create to best serve their clients in order to grow and remain successful.

  • August 25, 2017 /  Robotics
    techno15

    This is why a coach is so crucial. You need someone to hear your statements and point them out to you, help you question them, and then release them or replace them.

    My interview with Steve really made me aware that none of us listen to our language closely enough. I sometimes catch myself complaining or stating a limiting belief. I have to pause and ask myself, -Is the belief true in objective reality?-

    In other words, is it a fact we can all agree on and even measure?

    More often than not, it isn’t.

    Years ago, when I trained with famed bodybuilder and Olympia winner Frank Zane, I was urged to watch my mouth. Frank would tell me, -I pay attention to how people speak. Your statements are usually empowering, but when you got under the squat rack, you started to say you couldn’t do it.-

    He was right.

    Frank wanted me to learn that my thoughts were leading me to create my own limitations. My statements about what was possible were in fact programming me to expect the very thing I declared. I was programming a robot: me.

    I’m inviting you to monitor your thoughts and your language. What you say is programming you. As Steve pointed out in our in-depth interview, your words are speaking reality into being. But the reality you speak is one fabricated because of what you speak.

    Here’s what Steve suggests you do right now to remedy this:

    Speak as if what you want is already true. -I am a multi-millionaire.- -I am in love with the perfect person for me.- -I am healthy.- You get to choose. Make it now, present tense, and positive.

    Watch for clues. Your subconscious will hear your new language and begin to offer evidence for it. It will, in a sense, test you. Be sure to take action on the opportunities that arise, to prove you are becoming that which you speak you already are.

    Be that person. In other words, feel as though you already are what you said. Your emotion will stir motion in and around you to bring the desired state into being.

    As you review this post, what comes to mind?

    What are your thoughts right now?

    Do you believe you can reprogram your mind?

    Do you believe you can have, do, or be virtually anything?

    This is all part of the process of deprogramming the robot of you. It’s about freeing yourself of limitations. How you answer reveals your beliefs, not objective reality. You can remain programmed by circumstances and upbringing and past beliefs; or you can begin the process to take control right now and reprogram yourself for what you want.

    Remember, your subconscious mind will look for evidence to prove what you believe and expect.

    So, what would be really good for you to believe right now?

  • August 25, 2017 /  Science & Technology
    techno19

    The Master’s Thesis in Computer Science is considered as practice for the PhD thesis. MSC research thesis is too hard to embark on without research. The vital requirement of a Master’s Thesis is that it factually reveals the mastery: that you have fully understood the state of the art in your MSC research thesis and that you are competent of working at that level. This is principally significant when the function to be achieved by the structure is too complex to be explained in code, or maybe the condition-action mappings are unidentified in Masters Thesis.

    Writing a Master Thesis is an important task. Though in some ways, Master’s Thesis appears comparable to many other structures of academic writing like research paper, dissertation and essay.

    The MSC thesis offers the challenge to demonstrate your ability to set up and to carry out a scientific research project in a self-responsible and independent manner. MSC research thesis includes:

    * To provide a sufficient explanation and meaning of your research topic,

    * To build a sound hypothetical structure for direction of the research,

    * To collect data in a systematic and confirmable way,

    * To analyze the data significantly and suitably,

    * To present the results in an understandable manner,

    * To draw sound conclusions based on a thorough discussion of the outcomes, and

    * To show the prospective involvement of your research to the procedure of theoretical modernization of the topi

    Emblematic questions that need to be answered during a Master Thesis:

    * What problem are you solving?

    * Why is this problem imperative?

    * Who else is working on this dilemma, on allied research?

    * What process have you used to solve this problem?

    * Why did you select this process/technique? Is this method superior to other methods?

    * What was the most complicated part of your work?

    * What are the lingering troubles?

    We know this all sounds understandable, but every year there are students who get so marsh down in methodological aspect that by the time they are prepared to defend, they cannot persuasively answer these questions. So, you are preparing to write ain a tentative area of Computer Science. Unless you have written many formal documents prior to, you are in for a revelation; it’s complicated.

    Good writing is necessary in a MSC research thesis. However, good writing cannot recompense for a rareness of ideas or impressions. Quite the differing, a clear appearance always exposes flaws.

    If you simply follow the implications outlined and discussed in this paper, you will be well on your way to fruitfully carrying out the Master Thesis requirements for achievement of a Master’s Degree in Computer Science at any Institute of Technology.